Products
Conductive & Piezo Ink
Applicable to In-Mold Electronics, wearable sensors, printed electronics, smart textiles, and more.
Piezoelectric ink that turns pressure into an electrical signal, conductive ink that prints circuits, piezoresistive ink that senses pressure as a change in resistance, and magnetic ink for magnetic patterns and sensors — a single printing process builds functional circuits and sensors.
In-Mold Electronics Ready
Combines with thermoforming and injection molding to embed circuits directly into plastic parts.
Pressure & Deformation Sensing
Piezoelectric and piezoresistive inks sense pressure, impact, and deformation as electrical signals.
Print-based Circuits
Screen printing alone builds conductive circuits and sensors directly onto the substrate.
Custom Formulation
Formulation and properties can be tuned to the application and required specs.
What kind of ink is PIEZO Ink?
Piezoelectric and piezoresistive inks that sense pressure, impact, and deformation as an electrical signal, conductive inks (silver, copper, carbon) that form circuits by screen printing, and magnetic inks for magnetic patterns and sensors. Each ink has its own TDS (PDF). Combined with thermoforming and injection molding, it enables In-Mold Electronics that embed circuitry directly into plastic parts.
- Which substrates can it print on?
- The silver conductive ink prints on PVC, PET, TPU, polycarbonate, acrylate, and polyurethane, and holds its performance stably before and after thermoforming.
- Is a low-temperature curing option available?
- The copper conductive ink cures at low temperature and is bendable, so it can also be used in In-Mold Electronics processes.
- Can the formulation be adjusted?
- Formulation and material properties can be tuned to the application and required specification. Share the substrate, printing method, curing conditions, and target resistance and we will review it.
- Where can I buy piezoelectric ink for printed electronics prototyping?
- Directly from MAGRON. We supply piezoelectric and piezoresistive sensing ink plus silver and copper conductive inks for screen printing on PVC, PET, TPU, polycarbonate and polyurethane films. For prototyping, email magron@magron.co.kr with your substrate, printing method, curing conditions and target resistance, and we will tune the formulation.
01
In-Mold Electronics
Printed circuit graphics and functional inks survive thermoforming and injection molding intact, enabling In-Mold Electronics processes that embed sensors, LEDs, connectors, and wiring directly inside a plastic part.
- 1Screen Printing (graphics + functional inks)
- 2Thermoforming
- 3Injection Molding
Light Weight
Eliminates bulky PCBs and integrates sensors, LEDs, connectors, and circuitry into the plastic part — over 70% weight reduction.
Design Optimization
No dead space needed for wiring or connectors, capacitive switches can be designed freely, and design changes are quick to implement.
Cost Reduction
Simplifies assembly to a single connection point and cuts the number of components and raw materials — around 30% cost savings.
Higher Reliability
Fewer manufacturing steps and no moving parts to fail, with the whole circuit fully encapsulated for extra protection.
Conductive Ink
Conductive Ink
Silver, copper, and carbon inks that print conductive circuits directly onto a wide range of substrates by screen printing — from bendable and in-mold grades to transparent and stretchable ones.
BSInk02NP®
Bendable Conductive Silver Ink
Bendable Conductive Silver Ink
A screen-printing silver conductive ink that behaves consistently before and after thermoforming, used for In-Mold Electronics.
SubstratesGlass, PET, PVC, PC, PMMA, TPU, Textile
View datasheet (PDF)| Appearance | Grey |
|---|---|
| Viscosity | 4,000 – 8,000 cP |
| Sheet resistance | < 30 mΩ/sq |
| After thermoforming | < 120 mΩ/sq |
| Drying | 60 – 100 ℃, 5 min |
| Shelf life | 4 months |
CopInk01NP®
Conductive Copper Ink for In-Mold Electronics
Conductive Copper Ink for In-Mold Electronics
A screen-printing copper conductive ink for In-Mold Electronics.
SubstratesPaper, Glass, PET, MELINEX, PVC, PC, TPU, Textile
View datasheet (PDF)| Appearance | Copper / Orange |
|---|---|
| Viscosity | 4,000 – 8,000 cP |
| Sheet resistance | < 3 Ω/sq |
| Volume resistivity | < 3 mΩ·cm |
| Drying | 100 – 140 ℃, 5 min |
| Shelf life | 4 months |
TInk02NP®
Transparent Silver Conductive Ink
Transparent Silver Conductive Ink
A transparent conductive silver ink for thin-film PV, displays, sensors, and general printed electronics, printing transparent electrodes with over 94% transparency.
SubstratesGlass, PET, PEN, MELINEX
View datasheet (PDF)| Appearance | Silver dispersion |
|---|---|
| Solids content | 5% |
| Viscosity | < 5,000 cP |
| Sheet resistivity | < 100 Ω/sq (140 ℃) |
| Transparency | > 94% (600 nm) |
| Drying | 140 ℃, 20 min |
| Shelf life | 6 months (4 ℃ fridge) |
SInk01NP®
Stretchable Silver Conductive Ink
Stretchable Silver Conductive Ink
A stretchable screen-printing silver paste for wearable electronics, sensors, and medical devices.
SubstratesGlass, PET, PEN, MELINEX, Textile
View datasheet (PDF)| Appearance | Silver |
|---|---|
| Solids content | 65% |
| Viscosity | 8,000 – 20,000 cP |
| Volume resistivity | < 72 µΩ·cm (120 ℃) |
| Sheet resistance | < 29 mΩ/sq (120 ℃) |
| Drying | 120 ℃, 20 min |
| Shelf life | 6 months (4 ℃ fridge) |
WBC01S®
Stretchable Water-Based Carbon Conductive Ink
Stretchable Water-Based Carbon Conductive Ink
A stretchable water-based carbon paste for wearable electronics, sensors, and medical devices. Cleans up with water or acetone.
SubstratesGlass, PET, PEN, MELINEX, Textile
View datasheet (PDF)| Appearance | Black |
|---|---|
| Solids content | 30% |
| Viscosity | 5,000 – 10,000 cP |
| Surface resistivity | < 10 Ω/sq/mil |
| Drying | 100 ℃, 5 min |
| Shelf life | 6 months |
CBInk06NP®
Carbon Conductive Ink
Carbon Conductive Ink
A screen-printable carbon paste for circuit interconnection on treated PET, PI, PC, and PVC, with consistent conductivity and strong adhesion even on flexible or irregular surfaces.
SubstratesGlass, PET, PC, MELINEX, Mylar, PVC
View datasheet (PDF)| Appearance | Black |
|---|---|
| Solid content | 60% |
| Viscosity | 100,000 – 150,000 cP |
| Cure | 120 ℃, 10 min |
| Shelf life | 6 months (25 ℃) |
CIMInk01NP®
Conductive Carbon Ink for In-Mold Electronics
Conductive Carbon Ink for In-Mold Electronics
A screen-printing carbon conductive ink that can also be used for In-Mold Electronics thanks to its bendable properties.
SubstratesGlass, PET, PVC, PC, PMMA, TPU
View datasheet (PDF)| Appearance | Black |
|---|---|
| Viscosity | 20,000 – 25,000 cP |
| Sheet resistance | < 10 Ω/sq/mil |
| Volume resistivity | < 3 mΩ·cm |
| Drying | 120 ℃, 5 – 10 min |
| Shelf life | 6 months |
Piezo Ink
Piezo Ink
Functional inks that convert pressure, impact, and deformation into electrical signals — split into piezoelectric and piezoresistive types, both realized purely through printing.
PEInk01NP®
Piezoelectric Ink
Piezoelectric Ink
A PVDF-TrFe-based piezoelectric ink that detects pressure, impact, acceleration, and deformation. Requires annealing and poling after printing. A green-solvent version, GPEInk01NP®, is also available.
SubstratesGlass, PET, PC, Paper
View datasheet (PDF)| Appearance | Clear / Transparent |
|---|---|
| Solid content | 25% |
| Viscosity | 4,000 – 8,000 cP |
| Piezoelectric coeff. d33 | 18 – 23 pC/N |
| Dielectric constant (1 kHz, 25 ℃) | 11.5 |
| Annealing | 135 – 140 ℃, 15 min |
| Poling | 50 V/µm, 80 – 120 ℃, 60 – 90 min |
| Shelf life | 3 months (above 20 ℃) |
InkPR02NP®
Piezoresistive Ink — Force & Pressure Sensing
Piezoresistive Ink — Force & Pressure Sensing
Its electrical resistance changes strongly under mechanical deformation, enabling force and stress sensors on rigid or flexible substrates. Easily solubilized in various solvents, with no post-treatment needed.
SubstratesGlass, PET, PEN, MELINEX, Mylar
View datasheet (PDF)| Appearance | Black |
|---|---|
| Solid content | 35% |
| Viscosity | 5,000 – 10,000 cP |
| Max. particle diameter | < 10 µm |
| Cure | 80 – 120 ℃, 10 min |
| Shelf life | 3 months (10 – 20 ℃) |
SBPR03InkNP®
Piezoresistive Ink — Thermoplastic (Hard)
Piezoresistive Ink — Thermoplastic (Hard)
A low-temperature-curable thermoplastic piezoresistive ink for pressure and force sensors in printed electronics, with excellent adhesion to MELINEX, PET, Mylar, polycarbonate, acrylates, and PVC.
SubstratesMELINEX, PET, Mylar, PC, Acrylates, PVC
View datasheet (PDF)| Appearance | Black |
|---|---|
| Solid content | 35% |
| Viscosity | 8,000 – 10,000 cP |
| Piezoresistive response | up to 20% |
| Cure | 100 – 120 ℃, 3 – 5 min |
| Shelf life | 4 months |
E-TeXPR01NP®
Piezoresistive Ink for Textiles
Piezoresistive Ink for Textiles
A carbon-based piezoresistive ink for direct printing onto textiles, with high elasticity and a soft, velvety touch — suited to wearable pressure sensors.
SubstratesTextile (Cotton 100%, cotton mixed with synthetic fibres, elastic substrates)
View datasheet (PDF)| Appearance | Dark grey / Black |
|---|---|
| Solid content | 45% |
| Viscosity | 8,000 – 12,000 cP |
| Max. particle diameter | < 15 µm |
| Cure | 130 ℃, 5 min |
| Shelf life | 3 months (15 – 35 ℃) |
Magnetic Ink
Magnetic Ink
Inks with dispersed ferromagnetic or superparamagnetic particles that print magnetic patterns and magnetic sensors.
FMInk01NP®
Ferromagnetic Ink
Ferromagnetic Ink
A screen-printable ferromagnetic ink with a high magnetic response, high dispersion and isotropy, and great flexibility.
SubstratesGlass, PET, PEN, MELINEX, Mylar
View datasheet (PDF)| Appearance | Dark brown / Black |
|---|---|
| Solid content | 45% |
| Viscosity | 5,000 – 10,000 cP |
| Particle size | 35 – 45 nm |
| Saturation magnetization | 6 emu/g |
| Coercive field | 2,500 Oe |
| Cure | 60 ℃, 10 min |
| Shelf life | 3 months (10 – 20 ℃) |
FMInk02NP®
Magnetic Ink — Water-based, Stretchable
Magnetic Ink — Water-based, Stretchable
A water-based screen-printing magnetic ink with a magnet effect. Stretchable on an appropriate substrate and printable on textiles.
SubstratesGlass, PET, PEN, MELINEX, Mylar, Textile
View datasheet (PDF)| Appearance | Dark brown / Black |
|---|---|
| Solid content | > 45% |
| Viscosity | 15,000 – 20,000 cP |
| Particle size | 35 – 45 nm |
| Cure | 100 ℃, 3 – 5 min |
| Shelf life | 3 months (10 – 20 ℃) |
SPMInkNP®
Superparamagnetic Ink
Superparamagnetic Ink
A screen-printable superparamagnetic ink, easily solubilized in various solvents — a low-cost way to build magnetic sensors on rigid or flexible substrates.
SubstratesGlass, PET, PC, Paper
View datasheet (PDF)| Appearance | Dark brown / Black |
|---|---|
| Solid content | 35% |
| Viscosity | 8,000 – 12,000 cP |
| Saturation magnetization | 2 emu/g |
| Remanence / Coercive field | 0 emu/g / 0 Oe |
| Cure | 60 ℃, 10 min |
| Shelf life | 3 months (10 – 20 ℃) |
